Questo PCB si occupa di illuminare la vettura ristorante ACME Gran Confort WR 83.
Come riportato nel titolo é un progetto open source autoassemblabile da chiunque voglia.
Non appena avrò corretto alcuni problemi pubblicherò su github il firmware e i sorgenti, attualmente chi fosse interessato me li può chiedere e glieli spedisco, tuttavia essendo ancora in alpha vengono fatte modifiche quasi ogni giorno.
Vi riporto le caratteristiche:
- Schottky Diodes to provide CC power from Tracks
- MCP16331 to power Board at 5v
- PowerPack system by 3x 470uF Tantalum capacitors with slow charge system
- Board can be operate with these systems: CC Analog (from 7v), PWM CC Analog, AC Analog, Digital (DCC & Motorola)
- ATMega128A to Digital Operation
- Optoisolator to read DCC signal
- Optoisolator to give ACK signal in DCC programming
- JST SH 6 connector to program ATMega with ISP system and to provide I2C Bus from external target
- All Sections illuminated independently (Corridor, Vestibles, Kitchen and Tables)
- Space for 20mm round speaker (recommended 8Ω 2w)
- JST SH6 SoundPort (for external sound module): Power (5v: max 200mA, GND), I2C Bus and spaker.
- 2x JST SH6 ExpansionPort (for external Red Tail Lights module): Power (5v: max 200mA, GND) and I2C Bus.
- Digital Decoder Interfaces* (with Sound and SUSI BUS)
- Optoisolator to: detect presence of Digital Decoder and activate the SUSI bus, detect Digital loco decoder ACK and create it with builtin ACK system
Qua é indicata la licenza di distribuzione: https://creativecommons.org/licenses/by-nc-nd/4.0/
E infine un video di presentazione (é diviso in capitoli che trovate nella descrizione del video dato che é molto lungo)
[youtube]pbCz78ETkU4&[/youtube]